All Things Mk5 > How to Guides / Troubleshooting

Bluetooth Phone Install Problem

<< < (5/7) > >>

StephenED30:
Hi Darren, just a old Samsung Tocco (SGH-F480). Just set Mobil Box so I can just phone home.

StephenED30:
Have now played with the phone settings and copied the address book to the sim card, gone to car and updated contacts and now have 45 names to scroll through. Just need to get the star button working correctly now, when I press it, it comes up on the RNS 510 as language not supported, must be to do with the coding?  :confused:

StephenED30:
Been a while since I have done anything to this so this is an update. Have played with a few things and have now got the voice dialling to work when I press the star button on the steering wheel. Also have managed to get the star button on the sat/nav to work so that I can program the nav by saying new destination, media, radio etc. What I want to know is why the steering wheel star button when pressed will not control the sat/nav. If I press the star button on the sat/nav I can control everything. Hope this all makes sense.
Coding is as follows

01-Engine -- Status: OK 0000
02-Auto Trans -- Status: OK 0000
03-ABS Brakes -- Status: OK 0000
04-Steering Angle -- Status: OK 0000
08-Auto HVAC -- Status: OK 0000
09-Cent. Elect. -- Status: OK 0000
15-Airbags -- Status: OK 0000
16-Steering wheel -- Status: OK 0000
17-Instruments -- Status: OK 0000
19-CAN Gateway -- Status: OK 0000
25-Immobilizer -- Status: OK 0000
37-Navigation -- Status: OK 0000
42-Door Elect, Driver -- Status: OK 0000
44-Steering Assist -- Status: OK 0000
46-Central Conv. -- Status: OK 0000
52-Door Elect, Pass. -- Status: OK 0000
55-Xenon Range -- Status: OK 0000
56-Radio -- Status: OK 0000
62-Door, Rear Left -- Status: OK 0000
72-Door, Rear Right -- Status: OK 0000
77-Telephone -- Status: OK 0000
Address 16: Steering wheel        Labels: 1K0-953-549-MY8.lbl
   Part No SW: 1K0 953 549 AQ    HW: 1K0 953 549 AQ
   Component: J0527           036 0070 
   Coding: 0013142
   Shop #: WSC 01279 785 00200
   VCID: 8103ED4EA199

   Part No: XXXXXXXXXXX
   Component: E0221           002 0010

No fault code found.
Address 37: Navigation (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 C    HW: 1T0 035 680 C
   Component: RNS-MID       H04 2680 
   Revision: AB001001    Serial number: VWZ6Z7J9320057
   Coding: 080100420100001000
   Shop #: WSC 05314 000 00000
   ASAM Dataset: ------------------------- ------
   VCID: 2E59E6F2C087

No fault code found.
Address 56: Radio (J0506)       Labels: 1T0-035-680.clb
   Part No SW: 1T0 035 680 C    HW: 1T0 035 680 C
   Component: RNS-MID       H04 2680 
   Revision: AB001001    Serial number: VWZ6Z7J9320057
   Coding: 080100420100001000
   Shop #: WSC 05314 000 00000
   ASAM Dataset: ------------------------- ------
   VCID: 2E59E6F2C087

No fault code found.
Address 77: Telephone        Labels: 3C0-035-730.lbl
   Part No SW: 5N0 035 730 C    HW: 5N0 035 730 C
   Component: J412                8506 
   Revision: 00019000    Serial number: 0000A07751228
   Coding: 0013242
   Shop #: WSC 00152 210 91233
   VCID: 285510EAE263

No fault code found.

vRStu:
Try - 0013202 in 77.

It might need tweaking again but I'm working from a different label file at the moment.  :happy2:

StephenED30:
Thanks for that Stu. Will give it a try a bit later. Updated the firmware from 2680 to 2760 and have now got a different problem to solve, reverse camera has stopped working.
Monday,25,April,2011,19:33:31:54527
VCDS Version: Release 10.6.4
Data version: 20110418


                Address 37: Navigation       Labels: 1T0-035-680.clb
Control Module Part Number: 1T0 035 680 C    HW: 1T0 035 680 C
  Component and/or Version: RNS-MID       H04 2760
           Software Coding: 080100420100001000
            Work Shop Code: WSC 05314 000 00000
              ASAM Dataset: ------------------------- ------ ()
                      VCID: 2E59E6F2C087
1 Fault Found:

02873 - Control Module for Back-Up Camera (J772)
            004 - No Signal/Communication
             Freeze Frame:
                    Fault Status: 01100000
                    Fault Priority: 5
                    Fault Frequency: 1
                    Reset counter: 54
                    Mileage: 39607 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 19:29:59

Just sent a PM to SteveP about it as I’m sure someone on here has had the same problem, one step forward and one back.

Navigation

[0] Message Index

[#] Next page

[*] Previous page