All Things Mk5 > How to Guides / Troubleshooting

Bluetooth Phone Install Problem

<< < (7/7)

StephenED30:
It’s installed as per this guide,

http://www.mk5golfgti.co.uk/forum/index.php/topic,10027.0.html

been no problem at all up until I did the firmware update. Have now taken the √ from the box under the 37 nav menu and fault code is now gone. Will see if I can check fuses tomorrow just in case one has blown, don’t see how though. Thanks for all the help.  :happy2:

alexperkins:
Firmware updates can remove coding.

This is the part I'm referring to

--- Quote ---Open the Navigation (37) controller and select coding, then long coding helper, then in the forth block set bit 6 to on (shown as "Backup Camera Low"), close the long coding and saving the new coding. Reboot the RNS-510 by pressing the "<" & ">" & "i" button.
--- End quote ---

StephenED30:
Thanks Alex, that’s where I have removed the √ from, the reverse camera is just showing a fault with the box √ and not displaying on the sat/nav. Hope that makes sense.

alexperkins:
Ah I get ya. Interesting that. It could be a bug in the firmware thats causing that. There was a bug in 3810 that wouldnt let me code it to the gateway!

Navigation

[0] Message Index

[*] Previous page