General > Shows, Events and Meets
JKM Rolling Road June 18th
alackofspeed:
--- Quote from: chungster on June 18, 2011, 09:16:40 pm ---of course JKM could have done a mis match of roller speed vs engine speed when setting up (but Jim takes great care setting up the car on the roller before doing the power run so bit unlikely)
--- End quote ---
The lines look to cross at around 5250 so speed / rpm appears fine.
rich83:
Carrera... I would say that its the intake holding your car back on the top end.
Saint Steve:
there's not much wrong with bluefin on a Ed30, shame either myself or Alex Perkins couldn't make it yesterday, as both our cars at stage 2 arent exactly slow..
Mine ran stage 1 bluefin at 284.6bhp, and still unknown at stage 2, but the bum dyno thinks it's hitting the 300 barrier.
Not sure which car you have jussa? Ko3 or ko4..
As Hedge has said, power is useless without traction, so having Revo isn't always the best map to fork out for.
is it me or did JKM's rollers all run figures about 20bhp above normal readings?
Did someone say the rollers had a problem?
E30Dom:
No problems with the rollers?? :booty:
Carrera2RS:
--- Quote from: richwig83 on June 19, 2011, 01:14:59 am ---Carrera... I would say that its the intake holding your car back on the top end.
--- End quote ---
Thanks guys but looking at other graphs with ED30's at 6-7,000 they make over 260 hp before the limiter cuts in, plus the AFR is not an issue at 297 hp, something not quite right over 5,800 IMO ?
Not sure an air filter will solve, I am awaiting something that is quieter than the ITG's to be honest.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version