All Things Mk5 > How to Guides / Troubleshooting

retro fit tyre pressure kit

(1/4) > >>

DamoP:
i have just brought the tyre pressure kit off another member (switch + loom) has/does anyone know how easy if is to fit?? would it need coding to my car??

Eddie-NL:
easy to fit

DamoP:
Is there a fitting thread that you know of?? and will it need coding??

Snoopy:
If we are talking VWs TPMS

This Maybe of some help
http://www.mk5golfgti.co.uk/forum/index.php?topic=7677.0
and




--- Quote from: SteveP on January 29, 2011, 09:45:23 pm ---Here's a bit more detail.

Basically it can be installed without cutting any wires you only need to run one wire from the swtich up to the ABS controller behind the battery.

The other connections can all be taken from the ESP swtich and using a combo of pre-made wires and a couple of connector housing it will look something like this: -

Wires taken out of the ESP switch into another connector housing



New loom reconnected to ESP swtich to "pick-up" the required power/signal's



All complete and looking OEM (other than I only had black cable ties and OEM fit is clear)


  :smiley:

--- End quote ---

DamoP:
Thanks mate ,  ill tackle that next week. where did you go through the bulk head?? is it obvious where the connection goes on the abs controller??

i see you have 4 switches on yours , what are the other 2??

Navigation

[0] Message Index

[#] Next page