All Things Mk5 > How to Guides / Troubleshooting

IDIOTS GUIDE TO POWER SEATS

(1/2) > >>

jimmy-s3:
I have Edition30 seats in my '05' GTI.
Obviously my car didnt come with wiring loom to power the heated seat function or lumber support, but what im wanting to do is adjust the lumber support as it doesnt feel as firm as the passanger side (which hardly gets sat in).

How can i get some power to the seat to adjust this and does anyone know what is what under the seat??

Thanks in advance :happy2:

apollo13:
You will just need a 12v feed and ground to the big black plug under the seat.

This wiring diagram is for heated seats from 2007 onwards, as they are ED30 I'm sure they are 2007+.

This diagram doesn't allow for lumbar support though so check your drivers side plug and look for the pin thats not listed in this diagram.

Pin 5 is your ground.

http://1.bp.blogspot.com/_y2Yifl1vjns/S4dVKZUaaEI/AAAAAAAAD2M/IO5x7mC7g1M/s1600-h/Heated+Seats+2007%2B.jpg

jimmy-s3:
Still abit unsure? Im not 100% confident of reading wiring diagrams?

apollo13:
Jimmy undo the big black plug on the seat you want to adjust and take a pic of it and post it on here.

Try and get a decent photo of the pins and wires going in.

jimmy-s3:
Will do!

Navigation

[0] Message Index

[#] Next page