All Things Mk5 > Performance Modifications
TT or S3 fron suspension arms
Carrera2RS:
I think I have settled on the TT arms with balljoints. The list appears to be this
TT Aluminum Control Arms Parts List (pricing from genuineaudivwparts):
8J0 407 151 D (need 2 Same part # left and right) $216.00 X 2
Ball Joints
8J0 407 365 $92.16
8J0 407 366 $92.16
Ball Joint Nuts
N 103 320 02 $0.66 - need 6
N 909 429 01 $1.07 - need 2
Ball Joint Bolt Stud Brackets:
8J0 407 175 $11.88
8J0 407 176 $11.88
Bolt for Rear Bracket to sub-frame
N 105 797 01 $1.32 need 4
Bolt for Rear Bracket to frame
N 908 235 01 $1.87 need 2
Bolt for Front Bracket- horizontal
N 101 410 01 $2.82 need 2
12 Point Axel Bolts
WHT 002 795 $2.82 need 2
My only remaining questions are where is the cheapest and will the WALK fit :party:
danishmkvgti:
--- Quote from: Carrera2RS on March 28, 2011, 02:59:52 pm ---I think I have settled on the TT arms with balljoints. The list appears to be this
TT Aluminum Control Arms Parts List (pricing from genuineaudivwparts):
8J0 407 151 D (need 2 Same part # left and right) $216.00 X 2
Ball Joints
8J0 407 365 $92.16
8J0 407 366 $92.16
Ball Joint Nuts
N 103 320 02 $0.66 - need 6
N 909 429 01 $1.07 - need 2
Ball Joint Bolt Stud Brackets:
8J0 407 175 $11.88
8J0 407 176 $11.88
Bolt for Rear Bracket to sub-frame
N 105 797 01 $1.32 need 4
Bolt for Rear Bracket to frame
N 908 235 01 $1.87 need 2
Bolt for Front Bracket- horizontal
N 101 410 01 $2.82 need 2
12 Point Axel Bolts
WHT 002 795 $2.82 need 2
My only remaining questions are where is the cheapest and will the WALK fit :party:
--- End quote ---
Q2. yes WALK will fit, mine did :wink:
Carrera2RS:
Great, just need to find cheap place for parts.
Then me thinks it's time for some lighter bigger anchors :evilgrin:
rex:
The TT arms are longer that the normal GTI ones.
About the TT hubs..
1. Do they fit on a mk5? I tired to figure that out but could not do so :( (the brakes will definitely fit, what about the steering rod?).
2. If they fit will we have to change the wheel bearing (or is it the same - just to let you know there are 2 different hubs and bearings on a mk5 depending on the model/year/engine....; so my guess is that we have to change them also)?
Could you guys post a image with the full TT hubs (I saw the one taken only for the arm pivot).
the bruce:
The bearings will fit from all what I know. :wink:
The steering rod will cause the biggest problem as replacing them by the TT rods
might be difficult cos the TT has a different steering rack.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version