All Things Mk5 > Performance Modifications
TT or S3 fron suspension arms
fab5freddy:
Your right they don't, but with the Superpro adjustable ball joints as suggested they do.
TT arms and ball joints give negative camber, but they also give an extra 10mm track which can cause problems with rubbing if you have aftermarket wheels or running low
That's why I suggested getting the Superpro, you get the weight saving of the alloy arms and the negative camber from the ball joints and save the hassle of rubbing :wink:
I've run the TT arms previously and have moved to the set up above for the reasons stated
HTH. :drinking:
edd30:
I see what you mean now - I'm unlikely to lower the car - too many pot holes around here. Don't suppose you are selling your TT arms ?
fab5freddy:
There long gone at this stage :happy2:
sgour:
Im a bit in over my head at this since Im not really mechanically minded, but if I were to get the TT or S3 suspension arms are they just a direct fit/replacement or do I require anything else? Ive a creaking coming from this area and I figure its the bushes so I might as well upgrade them if they are going to have to come off anyway.
I already have the superpro anti lift kit and ball joint kit.
Thanks
BlackMk5Gti:
--- Quote from: fab5freddy on November 18, 2014, 10:17:00 pm ---Your right they don't, but with the Superpro adjustable ball joints as suggested they do.
TT arms and ball joints give negative camber, but they also give an extra 10mm track which can cause problems with rubbing if you have aftermarket wheels or running low
That's why I suggested getting the Superpro, you get the weight saving of the alloy arms and the negative camber from the ball joints and save the hassle of rubbing :wink:
I've run the TT arms previously and have moved to the set up above for the reasons stated
HTH. :drinking:
--- End quote ---
Sorry to resurrect an old thread but....I'm guessing all of you are playing with all these suspension components but don't have upgraded brakes?? I have 6 pot AP calipers and 356x32mm 2 piece AP discs. I purchased the superpro adjustable ball joints, went to fit them and they hit the back of my brake disc. Would fitting TT arms give me the -2.0 degrees of camber i am looking to achieve?
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version