All Things Mk5 > How to Guides / Troubleshooting
Alarm no sound
johnhol78:
--- Quote from: bodger00 on May 21, 2011, 08:33:37 am ---The rivet gun is about £20 BUT be careful that it accepts 6.4mm rivets! Most don't :happy2:
The alarm siren is in two parts, the siren itself and a metal holder with holes in to rivet this to the inner wing.
The alarm siren is bolted to the metal holder. You can't get the siren out without drilling out the rivets that keep the holder on.
Space isn't too bad and the job is quite simple with the right tools.
"Can any damage be caused by drilling out the old ones?" not unless you go and drill something other than the rivet. :happy2:
Where are you based?
--- End quote ---
Cheers Bodger...will get a replacement in a week or two. Get along to Slough TPS.
boxxer1973:
mine is the same did the new siren fix this?
bodger00:
It did for me :happy2:
Betty02:
Will hopefully sort this out end of month and this is the problem, if not then i would have wasted cash haha, will have to get a rivet gun adn rivets then.
Based in Blackpool NW matey you?
boxxer1973:
new siren for me it is then :happy2: thanks :drinking:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version