All Things Mk5 > Performance Modifications
TT lower arms and geometry changes
danishmkvgti:
the clearance is there, the trouble is the stock inner fenders doesn'r "rest" in the wider fenders and as such are getting "adjusted" by the tyres :wink:
vRSAlex:
I dont seem to get any arch clearance issue after fitting the TT arms. Maybe the vRS has a slightly wider front. The issue I do have is the WALK combined with the TT arms has given me too much caster and the wheels are much closer to the front of the arch than the rear. I have modded the WALK and managed to pull the subframe back slightly, but I may go back to the standard consoles with some superpro bushes.
What caster are you two running? Mine is around 9degs 15 mins. I would like it to be around 8degs 15mins.
56OctyVRS:
I was thinking of doing this to my octy but I think I will just stick to normal superpro/powerflex console bushes and not fit the TT control arms.
danishmkvgti:
--- Quote from: BDMAlex on May 02, 2011, 10:26:02 am ---I dont seem to get any arch clearance issue after fitting the TT arms. Maybe the vRS has a slightly wider front. The issue I do have is the WALK combined with the TT arms has given me too much caster and the wheels are much closer to the front of the arch than the rear. I have modded the WALK and managed to pull the subframe back slightly, but I may go back to the standard consoles with some superpro bushes.
What caster are you two running? Mine is around 9degs 15 mins. I would like it to be around 8degs 15mins.
--- End quote ---
Mine with WALK and TT mk2 lower control arms is set at 8,3(4-8)'
http://www.mk5golfgti.co.uk/forum/index.php/topic,7823.msg246912.html#msg246912
vRSAlex:
I will mod the WALK some more then to get the wheels back where I want them.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version