All Things Mk5 > Members Rides
Eddie-NL's Golf GT Tdi
Lilucas_R32:
Hi there Eddie-NL,
I was reading a post about a guy’s project, and he mentioned you helped him with coding his ABS module. I have basically the same situation. The ABS module on my MK5 R32 went bad, and I replaced it with a new one. Problem is the stock ABS module is a MK60, and the new one is a MK60EC1. I have vcds, but can’t seem to find a way to coding it properly. Is there anything you could do to help me? I have already swapped the front brake lines because they are crossed on the new pump, and also swapped the pins on the ABS module connector using a chart to match the diagram on the new module. I tried to send you a private message, but it didn’t work. Hoping you can at least point me in the right direction. Thank you in advance.
Sent from my iPhone using Tapatalk
Christiank:
@Lilucas_R32 - Don't think Ed is on here very much since he sold his Mk5 a while ago.
However PM a scan of your car, then maybe I can help you with that ABS long coding.
Did do this MK60 MK60EC1 swap myself.
Chris. :drinking:
Navigation
[0] Message Index
[*] Previous page
Go to full version