All Things Mk5 > How to Guides / Troubleshooting
Replacing a RCD300 radio with RCD510 with DAB into Mk5 GT with upto date CANbus
Craigevs:
Top thread really really helpful :)
dabonwheels:
The aerial requires 12Vpower, but I think the RCD10 provides the power via the coaxial, so I didn’t connect the 12v power lead from the JVC aerial to anything. I have great FM and DAB reception, but no longer have any AM reception, I don’t know if that is because the aerial is not getting enough power, or the splice. If you are installing an RCD510 without DAB you shouldn't have this problem because you don't need to change the aerial and therefore your AM reception should be unchanged. As I now have DAB it doesn't matter that AM doesn't work.
Only just noticed this post. You are not getting AM because the JVC aerial is not capable of accepting power via the coaxial cable. Thus your FM & DAB reception are not as good as they ought to either. For the HAL-2 to work properly, the power cable MUST be connected to +12V. Thanks, dabonwheels
paulw123:
WOW excellent thread
jonnboyy69:
Hi, firstly id like to thank the op and contributors to this very helpful thread, its been invaluable to me. I lost my original account on here so had to re-register :stupid:
For what its worth, ive finally and successfully completed swapping my old RCD300 into a RCD510 DAB radio.I have a MK5 GTI 06 plate (uk)
I also used this amazing thread to follow step by step and have very little else to contribute except perhaps added confirmation that the Blaupunkt fm/am/dab fakra beesting/sharkfin combo aerial is indeed faultless and requires no 12v feed to it.Contrary to the supplied instructions in the pack that illustrates that a seperate ingnition fed 12v feed is required, the aerial indeed gets its power from the single coax fm wire (white fakra,black wire) supplied to the roof.
I found that DAB and AM reception flawless and uninterrupted at all times with the bee-sting, however also had sucess with DAB/AM without it and only the sharkfin.Of course this is subject to location, im in the North East of England. The FM is flawless either way due to the double aerial system thus uses the rear heater element regardless.
If anyone is interested ive listed my sources as of 2013 for parts for the job below;
Blaupunkt Dab aerial; 91 euros
http://translate.google.co.uk/translate?hl=en&sl=de&u=http://www.caraudio24.de/Zubehoer/Antennen/Multifunktion/Radio-DAB/Blaupunkt-Shark-Line-A-RD-T-01-M-Antenne-Radio-AM-FM-DAB-7617495140001::18198.html&prev=/search%3Fq%3D7617495140001%26hl%3Den%26tbo%3Dd&sa=X&ei=BOfYUMu-C4aW0QWFtYG4CA&ved=0CD0Q7gEwAA
****** add the 8m coax cable as I found it just right with only approx 1m slack at end); 22 euros
http://translate.google.co.uk/translate?hl=en&sl=de&u=http://www.caraudio24.de/Zubehoer/Antennen/Multifunktion/Radio-DAB/Blaupunkt-Shark-Line-A-RD-T-01-M-Antenne-Radio-AM-FM-DAB-7617495140001::18198.html&prev=/search%3Fq%3D7617495140001%26hl%3Den%26tbo%3Dd&sa=X&ei=BOfYUMu-C4aW0QWFtYG4CA&ved=0CD0Q7gEwAA
Twin fakra splitter; £8
http://www.ebay.co.uk/itm/FAKRA-VW-RNS-RCD-510-310-315-radio-antenna-aerial-adapter-Seat-Skoda-Columbus-/261163682162?pt=UK_In_Car_Technology&hash=item3cce918972
Pre-coded Canbus Gateway; £85
http://www.ebay.co.uk/itm/VW-CAN-Gateway-CAN-BUS-Precoded-RNS510-RCD-Skoda-Columbus-Bolero-Golf-Mk5-Gti-/130893360259?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1e79da2c83
Rcd 510 WITH*** DAB****
An example of current Ebay offerings is below;
http://www.ebay.co.uk/itm/RCD-510-DAB-/281103593233?pt=UK_In_Car_Technology&hash=item4173146f11
I carefully sourced my RCD DAB from a reliable Ebay importer from Europe , brand new with code and box for just £199, but he has no RCD DABs for sale at moment by looks of things, however here is a link to his site if needed and some become available; http://www.ebay.co.uk/sch/vagtec_cz/m.html_nkw=&_armrs=1&_from=&_ipg=&_trksid=p3686
I coded my own Canbus purchased off Ebay as I have the Vagtech software, using the pre-coded and contacting seller will save you a headache and £240 I guess!!!!
Any questions/tips just pm me and ill try to help .
regards, John
P.s: my 06 GTI is basic old style MFD has no MFSW or AUX or Bluetooth so cant help with that side, and the RCD510 did not need extra coding to verify change of car, only the Canbus required re-coding!
nikeboyuk:
Did anyone manage to get this working with an OEM aerial (sharkfin style).???
I have an oem 3c0035507ab (GPS+dab) and have plugged it into an rns510 dab, and in the hidden menu for DAB I'm only seeing the below:
Frequency:215.072
Q: Mute
Ant1: ACTIVE
BER: 4
I'd REALLY like to get this working with the OEM aerial, wondering if anyone can point me in the right direction ?
I'm debating going down to local VW and plugging in head unit to factory wired aerials to test it, but would like to know if anyone has any ideas if its points to faulty aerial or faulty RNS510 :(
Thanks,
Rich
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version