All Things Mk5 > How to Guides / Troubleshooting

How do I paint my parts? :D

(1/5) > >>

big al:
Hi guys, going to try and save a few £ and paint my engine cover myself.
Have seen some people do small parts like steering wheel inserts.
was just wondering how to do it, and what are the best products to get (think I am limited to Halfrauds sprays)
How much do I need to sand?
Do I sand,then prime,then sand again and then top coat?
 
Any advice would be appreciated.
Thanks

flinty:
start with sanding 240-400-600 grit,
primer
sand primer 600grit
paint then no need to sand
then if using metallic paint if you sand the paint itll look crap so best bet is if you get runs sand them out then repaint then laquer, then sand with 1000 -1500 wet  then polish to a shine

big al:
That's great thanks for the tip.
Where would you recommend I get the paint from?
Is there any difference depending where I buy it or is it all the same really?  :happy2:

flinty:
halfrauds is as good as any for rattle cans

bodger00:
Patience is the key, dust free environment and rub down after each coat :happy2:

Navigation

[0] Message Index

[#] Next page