All Things Mk5 > Performance Modifications

S3 intercooler

<< < (2/3) > >>

MAT ED30:
Just order the hoses makes life and the job easier

Jk911:
He is also giving me the s3 hoses, will these fit, my car has ko3?  :smiley:

bacillus:
Important Note for K03 Turbo owners looking to perform the S3 upgrade:
The OEM Turbo discharge transfer pipe part number 1K0 145 840 Q - does Not work with the Audi S3 Intercooler upgrade as the Intercooler entry side turbo hose has a different orientation of locking keyway.
This 'non working' transfer pipe is 'generally' fitted to (and therfore effects) later cars, typically MY 2006 onwards. However an actual inspection of the pipework type fitted to your car is always recomended as it is not easy to state what models have the 'Transfer Pipe that works' fitted by chassis look up.
See the images below for infomation on what you are looking to identify for whether you have the correct pipe already fitted to your engine.

Jk911:
 :sad1:Mine is 55 plate, will have lot check this out,thanks

martziniuk:
I just hacksawed the metal coupler down one edge and put it in a vice to crush it to get the remainder off, It leaves all the rubber hose intact and takes about 2 mins a hose. You will need to trim a little off the passenger side hose but the drivers side fits perfect. There really is no need to fork out for the S3 hoses unless you plan to put the original back on at a later date.

Navigation

[0] Message Index

[#] Next page

[*] Previous page