General > Detailing

Read the guide but still have questions

<< < (2/2)

stealthwolf:
VW garages don't have detailers. They have valeters.
In all honesty, I'd wash, clay, rewash, dry and then use something like autoglym super resin polish which can be done by hand.

Frenzy:
Thanks for that advice. If i went that route does it mean no glazing or waxing after the resin polish?

stealthwolf:
A true glaze will be fine but most have paint cleansers which would remove the fillers that SRP puts in. I would avoid the likes of lime prime. Use something like megs #7 glaze or red moose machine glaze. Otherwise just finish with a wax. Some people use Autoglym's extra gloss protection.

In the past, I've used SRP followed by EGP and then something like collinite 476s without any problems.

Frenzy:
*Edited* Answered my own dumb question by finding out that Collinite 476 is a wax  :grin:

Navigation

[0] Message Index

[*] Previous page