All Things Mk5 > Members Rides
Tfsi Mikes Money Pit :: AKS built Cupra :: TTE420 :: Rtech Tuned
b9rgo1234:
I had to adjust the bumpers, i think they are out 3 or 4 click now.
The struts are exactly the same length as the standard leon struts so open to the same height.
Im not sure how 500nm struts would do, if you fit lexan windows and remove the rear wiper motor that should save a fair bit weight :happy2:
Tfsi_Mike:
--- Quote from: b9rgo1234 on November 18, 2011, 08:21:50 pm ---I had to adjust the bumpers, i think they are out 3 or 4 click now.
The struts are exactly the same length as the standard leon struts so open to the same height.
Im not sure how 500nm struts would do, if you fit lexan windows and remove the rear wiper motor that should save a fair bit weight :happy2:
--- End quote ---
not had a rear wiper for 3 years :P 510NM then
Was quite stiff to shutt with fabia ones :scared: 500NM
rich83:
Yeah the fabia ones are stiff... one reason why i sold my setup!
damoegan:
Mike, the struts from SD are adjustable. You can adjust the force of them with a little allen key to bleed off some of the gas :happy2:
Tfsi_Mike:
--- Quote from: damoegan on November 18, 2011, 09:09:22 pm ---Mike, the struts from SD are adjustable. You can adjust the force of them with a little allen key to bleed off some of the gas :happy2:
--- End quote ---
I will ring them. I was looking at fixed force ones but if like you say you can fine tune them, should be able to get it bang on :)
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version