All Things Mk5 > Members Rides
Tfsi Mikes Money Pit :: AKS built Cupra :: TTE420 :: Rtech Tuned
56OctyVRS:
BCS is the way to go :happy2:
What did they change the gaps on the plugs too?
Tfsi_Mike:
Fitted Forge supersize Dv today. Have a decent idle but is stalling every time I slow right down :sad1:
Going to check everything is tight to ensure there are no leaks and check the o ring inside the dv to ensure its seated properly. Further than that god knows :confused:
Hasn't been my week.
Also raised the car today, 300mm arch to top of my team dynamics wheel cap all round. Is much more driveable but may need to come up another 5mm as its still scrubbing.
benjii:
Really has not been your week mate but many thanks for sending out the dv :happy2:
Hope things look better soon :driver:
Tfsi_Mike:
Tightened the hose clamps last night and went for a spin, still stalling when slowing down...
Going out now to take a look inside the DV to check the seal.
When removing the nuts for the original DV bracket the part below pulled away from the inlet manifold a little
(the brown bit) It pushed back on okay, could something have been damaged causing a leak?
Further than that any ideas?
It wasn't broke, shouldn't have fixed it. Typical shiny kit syndrome as usual
Andy:
thing we have all done a mod on our cars to then make it run like a bag of spanners,then think why oh why didn't i just leave it alone :sad1:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version