How to, Midline to highline retrofit

All Things Mk5 > How to Guides / Troubleshooting

<< < (14/16) > >>

Shanny:
Hi, I have a golf 54 plate gt tdi, I do not know the number of my existing clocks, but I have purchased r32 clocks which end in 972 F
Will these fit in my car. The clocks are off a dsg car but mine s manual.
I'm in Manchester so I need to know if anyone can scan my car or check if they can fit.
Email shannykahn at yah*oo dot com
Remove *

jabberwokki:
Hi all, hope somebody can help have a 2004 mk5 golf 1.6fsi and after fitting a rns510 wanted to upgrade to a highline cluster i have vcds and vag commander 4.5 have managed to retreive the SKC from the old cluster and save a copy of the immo data using vag commander but new cluster i am struggling to read and write to cluster is a 1K0920974A after reading lots of threads on various site understand this is because original is immo4 and replacement is immo4c ...but also understand they can still be swapped can somebody point me in the right direction to either do myself or somebody in S.wales with the correct tool
many thanks

dave1814:
Sorry to revive this thread - but i assume if you have any problems with the new cluster you can always put the old one back in and the car will start?

thanks!

RetroRaz:

--- Quote from: dave1814 on February 09, 2017, 01:13:05 pm ---Sorry to revive this thread - but i assume if you have any problems with the new cluster you can always put the old one back in and the car will start?

thanks!

--- End quote ---

Yes it will.

Text me, i emailed you my number. I can answer all your queries regarding clusters

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version