All Things Mk5 > Performance Modifications

Forge BOV problem. + Coilover questions

<< < (3/3)

Tfsi_Mike:

Mine hissed really bad when one of the vaccuum hoses to the DV split, I just trimmed it back past the split and re fitted it  :happy2:

SL03 JOE:
may have to have a look at this, still havent got around to it  :sad1:

i tried fitting my AP coilovers the other day and couldn't get the old ones off, so i just put it back together and im going to try again next weekend, may take the whole hub off and knock it off :P


Joe.

johnboy07:
forgive me if you are aware and did this but you will need to spread the hub at the back were the shock slides into. Ive always used a chissel as i had a blunt one lying around and works perfectly. Without doing this you will stuggle to ever get it out or the new ones in. Spread it slightly and knock the hub down. May be worth spraying WD40 on it the night before. Hope it helps  :happy2:

SL03 JOE:

--- Quote from: johnboy07 on August 19, 2011, 06:29:59 pm ---forgive me if you are aware and did this but you will need to spread the hub at the back were the shock slides into. Ive always used a chissel as i had a blunt one lying around and works perfectly. Without doing this you will stuggle to ever get it out or the new ones in. Spread it slightly and knock the hub down. May be worth spraying WD40 on it the night before. Hope it helps  :happy2:

--- End quote ---

yes mate thats what im going to do, But Duck oil so should help a hell of a lot.

Joe.

Navigation

[0] Message Index

[*] Previous page