All Things Mk5 > How to Guides / Troubleshooting
Cruise Control fitting guide
MPS:
This is what I bought, bargain!
http://www.amazon.co.uk/Draper-12768-3-Piece-2-Inch-Square/dp/B0001K9P00/ref=sr_1_6?ie=UTF8&qid=1321215516&sr=8-6
sarahw:
i have a 55 plate , i only needed the stalk if this help :jumping:
vRS_Pagey:
Really? Perhaps a previous owner fitted the diagnostic cable?
MPS:
Just to warn people considering buying spline bit sets, a spline is different from an XZN bit, the difference is in the angle of degrees on the splines of the 2 types of bit. Whether there is enough of a difference to make it not fit the bolt however, I'm not sure. I used a 12mm XZN bit and that fitted 100%. You don't want anything slipping when it comes to torquing up the bolt.
Sorry if that made your head hurt, I just re read it and it did me. :confused:
sarahw:
--- Quote from: vRS_Pagey on November 13, 2011, 08:34:03 pm ---Really? Perhaps a previous owner fitted the diagnostic cable?
--- End quote ---
.
nope it was me that got it retor fitted :P
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version