All Things Mk5 > Performance Modifications

k04 turbine and housing sizes

<< < (3/4) > >>

graeme:
took the car up to the guy 2day , simon seemed to know alot about cars but unfortunatlt the car ran 312bhp at the flywheel with crazy boost spikes , made a couple of tweaks but the car still kept hitting limp mode he seems to think it could be the boost actuator ?  :confused: (the car was allready hitting limp mode b4 i took it to him)

PDT:
Datalogging should show up the issue. I assume he was using vagcom or similar to log it all?

PDT:
Ate you using the k04 injectors? What was the fault codes from the limp mode?

graeme:
It was on a dyno . they are golf edition 30 injectors i thought the setup should run roughly about 360bhp . the engine managment light is not coming on but i dont have a fault reader avalibale at the moment to read them , i am going to borrow one 2 morrow 2 check there isnot an underlying problem. I am talking to the guy down at DNA tunning at this moment to see what can be done . have you got any tune mapped guidlines for this sort of thing ? thank you for helping mate. :happy2:

bacillus:

--- Quote from: graeme on September 17, 2011, 06:39:04 pm ---i thought the setup should run roughly about 360bhp
--- End quote ---

Interesting as revo quote 340-350...

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version