All Things Mk5 > Mk5 General Area

Air Intake

<< < (6/6)

xxx_mojo_xxx:

--- Quote from: billyboy on April 04, 2009, 10:18:59 am ---
--- Quote from: bacillus on April 04, 2009, 10:01:12 am ---
--- Quote from: xxx_mojo_xxx on April 04, 2009, 08:56:59 am ---The Pipercross is very similar...you have to remove the aire filter in the engine cover.



--- End quote ---

Hmm, if you remove the stock air filter from the air box you lose the air tight seal the filter provides so you'll be sucking up unfiltered air into the turbo/engine. Also there is a drain hole at the bottom of housing, is that blocked off using that intake kit?

--- End quote ---
kwik fix is cut out the sandard filter to leave the rubber seal, and fit that into the groove to seal, then put the cover back 2gether

--- End quote ---

As part of the Pipercross kit you get a replacement pass thru filter which essentially is the seal with a large mesh to let the air pass through freely.

bacillus:

--- Quote from: xxx_mojo_xxx on April 04, 2009, 10:58:43 am ---
As part of the Pipercross kit you get a replacement pass thru filter which essentially is the seal with a large mesh to let the air pass through freely.

--- End quote ---

What about the water drain hole, is that blocked off?

luca:
IMO the Dbilas is the best design i have seen so far. Not a fan of open filters at all

RedRobin:

--- Quote from: luca on April 04, 2009, 11:16:14 am ---
IMO the Dbilas is the best design i have seen so far. Not a fan of open filters at all


--- End quote ---

.... x2 - I'm not a fan of open filters either.

The new Carbonio/APR appears to be a good design and I've heard that APR will be bringing out a FSI engine version to accommodate the different position of the MAF from the later TSI engines it is now available for.



Linky : - Carbonio TSI Intake Info

pazz:

--- Quote from: prepree on April 03, 2009, 11:04:50 pm ---£365 aint cheap at all
--- End quote ---

Especially when 95% of is plastic. Yes you hear me, the pipework is plastic.

The BSH one gets better reviews and is metal pipework, so gonna wait for this groupbuy.

Navigation

[0] Message Index

[*] Previous page

Go to full version