All Things Mk5 > How to Guides / Troubleshooting

Fitting New Alarm

<< < (2/9) > >>

Betty02:
Right chaps, alarm arrived today. Didn't realise how tiny it was!! 6" max if that!

Now I have my drill ready and rivet gun and rivets.

How easy is removing the inner liner? Wheel off and undo some bolts? Is it easy from there? Don't want to drill out the wrong bloody box lol!

Thanks!

skard:
Yep, wheel off, remove some torx (T25?) screws and you'll see the box. Drill out the rivets and it's all pretty self explanatory from there  :happy2:

You'll need a spanner, maybe 13mm from memory, to bolt the siren to the box.

Betty02:
Swapped them over this weekend with the new alarm and still doesn't bloody work!!

Any more ideas/suggestions? I've checked the interior fuse box and all the fuses are fine?

Any help would be appreciated!

skard:
Can you scan it?

New siren is also gubbed or incompatible?

Betty02:
Shouldn't be was tested before I received it? Same part numbers too!

Don't have Vag-Com so can't get a scan unfortunately! Quite annoyed now tbh had a hell of a weekend with the car!

Navigation

[0] Message Index

[#] Next page

[*] Previous page