All Things Mk5 > Mk5 General Area

Ekta help Required - Dogbone mount Bolt spec

<< < (2/2)

QD MBE:

--- Quote from: SteveP on April 09, 2009, 10:22:04 pm ---Is it any of these Dave?


--- End quote ---

Steve you star, it is number 30.  What does it say in the legend?

 :happy2:

SteveP:

--- Quote from: stokeballoon on April 09, 2009, 10:40:23 pm ---
--- Quote from: SteveP on April 09, 2009, 10:22:04 pm ---Is it any of these Dave?


--- End quote ---

Steve you star, it is number 30.  What does it say in the legend?

 :happy2:

--- End quote ---

Here is all the details on part 30

QD MBE:
Well i removed the bolt, and replaced it with a bolt i had in the drawer.  I had some M14 x 1.5 80mm long bolts in the garage.  The bolt I fiited is not a stretch bolt, and I torqued it up to 100Nm + 90 degrees, as per the Maint manual (thanks T_T).

The original bolt in my opinion is not a stretch bolt, but it is definetly about 5-8mm too short, due to the extra thickness of the bush, and washer.

I think the bolt I used came from a suspension part (don't ask where, as i stripped them down a while ago)off the S3 hubs I bought.

Cheers for the help with the Etka Steve. 

Navigation

[0] Message Index

[*] Previous page