All Things Mk5 > Performance Modifications

re-map

(1/5) > >>

JASGTI:
 :grin:
Just had my 57plate GTI remapped by Mark at http://www.southwestincartech.co.uk/.
He was friendly, helpful and very well priced. They don't offer Stages as he believes in re-mapping the car to the spec that you are running at a set price to each vehicle.
He first did a rolling road to  collect the date from the car and a print out to show pre-mapped  figures.
Then he went in the back room(where the magic happens) and designed a map to suit my car, with a twin take forge turbo hoses, forge dv.
Next the new map was uploaded to the car and another rolling road session, not totally happy with the first results (256.2bhp , 293.1lbf.ft) he went into the back room again and came back out for another go and glad he did, then after 3more runs to make sure it wasn't a fluke we arrived at 265.8 bhp and 305.7lbf.ft. the car drives excellent and returns better MPG than before. :driver:

All in all a good day out only took 2hours(plus the shopping in Bristol after-wards keep the misses happy :signLOL:)
 
Defiantly worth a visit and may be a good place for a rolling road day meet in the new year as its just as you get off the motorway(m4)

Weston:
What dyno was that on?

JASGTI:
   
   

MAHA LPS3000 rolling road at SWICT

The MAHA LPS 3000 2 Wheel Drive Dynamometer is arguably the best, most accurate automotive performance tester available. It is the choice for many automobile manufactures for development and final testing at the factory, providing repeatable accurate results. Usually within 1%!!

MAHA Dyno

    * Measuring true crankshaft horsepower and torque, No more random power train loss guessing. This dyno measures drivetrain loss during each run cycle.
    * Provides SAE Corrected Horsepower and Torque depending on atmospheric data.
    * Small roller size aids in very accurate power measurements but not so small too be unstable.
    * The Eddy Current brake can measure power up to 850 hp.
    * Direct data acquisition from the OBDII port. RPM, Air/Fuel, Boost, Ignition Timing can be logged and plotted.
    * Special setting for Naturally Aspirated, Turbo and Supercharged cars and trucks.
    * High pressure 10,000 cfm cooling fans for accurate thermal control

Our dyno is available for rolling road days, privateers and corporate use. please use the contact form or call for more info.

PDT:
That torque figure is huge!, infact its oit far off a few stg2 K04 engines  :smiley:

JackG:
 :surprised: ko3??

Navigation

[0] Message Index

[#] Next page