All Things Mk5 > Mk5 General Area
Milltek on DSG Edition 30
SO8:
How much power increase do people think I would get with the following on my DSG Edition 30 with a full resonated Milltek TBE ....
Car as standard on Superchips RR (running 99 Ron fuel) was producing 229bhp.
Bluefin 'old' stage 1 295bhp (this is their map with the moderate torque increase - i.e. their older DSG map which is currently on my car)
Bluefin 'new' stage 1 299bhp (this is their new DSG map which is effectively the same as the manual one - it is on my computer but not the car at the moment :smiley:).
Is it just going to be figures on a piece of paper after another RR session or will I notice the difference ? FWIW if I do it, it will be resonated - I am not interested in non res at all.
Other than the remap the car is totally standard.
Views appreciated .....
182_blue:
how old is this new stage one that you talk about ?
SO8:
--- Quote from: 182_blue on April 12, 2009, 04:13:12 pm ---how old is this new stage one that you talk about ?
--- End quote ---
Christmas - their latest version ... got from them after they got around the torque limit for DSG boxes and it was reported on here .... There is nothing newer as I spoke to them about a week or so ago. FWIW I have had no issues with either map on the car at all ..... just prefer the older remap at the moment. I will no doubt get bored soon and change to the latest one for that 'bigger' hit :evilgrin:
They have said if I go down the TBE route they will email me the Stage 2 version with slightly more boost :laugh:
SteveP:
^^^ I saw a a jump of around 18-20bhp on their rollers after adding the TBE :happy2:
This was at the point they overcome the torque limit for the DSG car so don't know in real terms what the increase would have but on this.
gazbutS3:
I would have said about 15bhp for TBE so Steve's results verify this :happy2:
Navigation
[0] Message Index
[#] Next page
Go to full version