All Things Mk5 > How to Guides / Troubleshooting
my error codes
SteveS:
00768
--- Quote ---16684/P0300/000768 - Random/Multiple Cylinder Misfire Detected
Possible Causes
* Air Intake System leaking
* Fuel Supply faulty
* Injector(s) faulty
* Ignition Cable(s) and/or Spark Plug(s) faulty
* Ignition Coil(s) faulty
* Exhaust Gas Recirculation (EGR) Valve (N18) stuck/open
* Camshaft Position Sensor (G40) faulty
Possible Solutions
* Check Misfire Recognition
* Check Air Intake System
* Check Fuel Supply
* Check Injector(s) and Injector Sealing
* Check Ignition Cable(s) and Spark Plug(s)
* Check Ignition Coil(s)
* Check Exhaust Gas Recirculation (EGR) Valve (N18)
* Check Camshaft Position Sensor (G40)
Special Notes
* This DTC indicates that one or multiple cylinders are misfiring, but the ECU fails to identify the cylinder.
--- End quote ---
AND
00771
--- Quote ---00771 - Fuel Level Sensor (G)
00771 - Fuel Level Sensor (G): Open / Short Circuit to B+
Possible Symptoms
* Fuel reserve displayed value 0 (empty)
Possible Causes
* Wiring between Fuel Level Sensor (G) and Instrument Cluster: Open or Short Circuit
Possible Solutions
* Check wiring between Fuel Level Sensor (G) and Instrument Cluster
* Check Measuring Block Value
00771 - Fuel Level Sensor (G): Short to Ground
Possible Symptoms
* Fuel reserve displayed value 0 (empty)
Possible Causes
* Fuel Level Sensor (G) damaged
Possible Solutions
* Check / Replace Fuel Level Sensor (G)
--- End quote ---
:confused:
im guessing the fuel supply is causing missfire?
182_blue:
where did you get those codes ?
SteveS:
where? from a memoscan vw/audi canbus handheld thingy :)
chungster:
what are your mods again?? you have standard fuel pump don't you??
SteveS:
Just Carbonio and REVO Stage1.
Standard Fuel Pump yes.
Navigation
[0] Message Index
[#] Next page
Go to full version