All Things Mk5 > Performance Modifications

SuperPro's alternative to WALK kit....

(1/3) > >>

damoegan:
My console bushes are screwed so the cheapest way to replace them is to fit SoperPro bushes. These also gives the added benifit as being better bushes than you get in the WALK kit (aparently!)....

Now, the SuperPro bushed are acentric so my question is what is the correct orientation to fit them?

Any tips on what I should get the tracking set too?




Is this the correct orientation??



(pics borrowed from SteveP's thread  :wink:)

vRSAlex:
The pic shows the bush in the anti lift position. If you have the bush facing the outside of the console then that is the extra caster position iirc. I used to have pdf with the full explanations on but its vanished.  A sheet will come with the bushes explaining the best orientation to mount the bushes.

vRSAlex:
As far as alignment settings go then just stick to stock all round.

Superpro do their own wishbones now too. Have a look on their site a few newsletters back.

damoegan:

--- Quote from: vRSAlex on January 08, 2012, 11:24:16 am ---The pic shows the bush in the anti lift position. If you have the bush facing the outside of the console then that is the extra caster position iirc. I used to have pdf with the full explanations on but its vanished.  A sheet will come with the bushes explaining the best orientation to mount the bushes.

--- End quote ---

 :happy2:

Thanks Alex.

jonbmx900:
I was looking at doing this or the walk kit to my gt tdi

Navigation

[0] Message Index

[#] Next page