All Things Mk5 > APR Zone
APR stage 2+ v3.0
Janner_Sy:
I know mate. If this had been a few days earlier i would have saved ALOT of money. In fact that money would have paid for the turbo to be hybridized :sad1:
BUT APR already have a kit in development with the hybrid/intake piping/software so they are ahead of everyone else there......
--- Quote from: QD on February 04, 2012, 09:58:19 am ---Blimey! a lot of APR love, when there was such hate...........................Why?
--- End quote ---
Even in my build threadf it said i wanted to go APR first, but shark made a better offer. Then when i changed APR again was the main choicei wanted but tuningwerkes were useless. I then had a custom remap by jabba and that night this offer comes up :fighting: Gutted
vRS_Pagey:
--- Quote from: Janner_Sy on February 04, 2012, 09:34:40 am ---
--- Quote from: Keith@APR on February 04, 2012, 01:48:20 am ---If you come see me in MK, I have a new 1.4 calibration I would like to try on your car, FOC, but I don't know the power figures yet, just that it was putting bus lengths on competitor cars during testing. :evilgrin:
After that, you may or may not still want that hybrid and if you choose yes, my offer still stands.
--- End quote ---
keith keith keith keith
your killing me here. APR was the hot contender for my original remap, i then looked at changing the map after shark performance did it, and again APR were the hot contenders, and YESTERDAY I had my second Remap installed by Jabbasport and its very good :grin:
But yours is adjustable on the cruise stalk arghhhhhhhhhhhhhhhhhhhhhhhhhhhh
Im turning into heavyD :grin:
--- End quote ---
Digressing SY, but what made you ditch the Shark map?
Hedge:
--- Quote from: QD on February 04, 2012, 09:58:19 am ---Blimey! a lot of APR love, when there was such hate...........................Why?
--- End quote ---
No hate from me. :innocent:
Janner_Sy:
The fact that it requested over 2.2 Bar of boost (3.2 Bar absolute pressure) the whole rev range when the maximum the turbo can achieve is 1.6Bar (2.6Bar absolute) which coincidentally was what my turbo was making whilst working flat out to achieve a boost pressure that is unattainable.
yin:
--- Quote from: Keith@APR on February 04, 2012, 01:02:50 am ---
--- Quote from: ukdub on February 04, 2012, 12:40:32 am ---
--- Quote from: Keith@APR on February 04, 2012, 12:29:55 am ---
--- Quote from: ukdub on February 04, 2012, 12:18:19 am ---
--- Quote from: Keith@APR on February 04, 2012, 12:13:15 am ---
--- Quote from: ukdub on February 04, 2012, 12:05:46 am ---
--- Quote from: Keith@APR on February 04, 2012, 12:00:00 am ---
--- Quote from: ukdub on February 03, 2012, 11:48:16 pm ---
--- Quote from: Keith@APR on February 03, 2012, 10:50:19 pm ---
--- Quote from: ukdub on February 03, 2012, 10:42:56 pm ---
--- Quote from: RobH on February 02, 2012, 07:19:18 pm ---
--- Quote from: Poverty on February 02, 2012, 07:03:04 pm ---Lol instigators rob? What are you trying to suggest lol?
--- End quote ---
Well we all remember the handbags that went on here a few years ago towards APR and the "video" and now these people are working with APR :signLOL:
Revo instigators now turned APR instigators although the reasons behind this im not aware of :popcornsoda:
--- End quote ---
I wonder what Jonnyc will say about that video now........ :grin: Still fake and he was right or its real and he was wrong
--- End quote ---
Ask him. He is a stand up guy. We've all put our trust in the wrong hands before to be let down in the long run at some point or another in our lives.
If anything, he should get mad respect for being an early adopter and having the gumption to keep searching for the best.
--- End quote ---
Just for the record I didnt think the video was fake, I just find the whole Revo, APR, GIAC and Superchips threads quite amusing. All the companys are just brand names, it really does depends how good their employes are at there job, IE Software programers, exhaust designers and so on. All companys have staff turn over and things can change. All it needs in any of the above companys is their main programers/designers to leave and their next map not to be up to scratch.
As you can see by my sig below, I run APR hardware and REVO software. The reason for REVO software is because my local dearler changed and I wanted the best support for my car. I was running APR software with no problems until this point. I also stated in a threat quite some time ago that I thought APR had the best K03 software and REVO the best K04 software, the reason behind this was that I thought APR was 'backing off' so to speak their K04 file to protect their Stage III package. Just my personal thought and I still believe this today. The new figure that have been quoted of 380bhp at the flywheel for the Golf R (Ko4) isnt that far behind the quoted figures for APR's stage III package (GT2871) which is a lot more money to buy than going the K04 route. Thats just business though. :happy2:
--- End quote ---
I can see that making sense, pretty smart reading between the lines...
But, being one of the main decision makers at APR, I can tell you our original ko4 calibration is what we felt was safe for say a 24 hours endurance race at 320-340bhp and our Stage 3 calibration is/was the same at 380-400bhp.
Our v3.1 for ko4 cars is 360-380bhp, I'll release the final numbers when our maha is in, due to a more aggressive calibration that I wouldn't recommend to someone who races 24 hours. We are doing the same for our Stage 3 as well so the difference in power output will improve on it accordingly to provide a similar difference in power between the two as before.
It wasn't about protecting sales, it's about protecting turbo's and exhaust valves but since 99% of you won't race 24 hours, we have decided to give the people what they want with an option to choose our standard maps if desired.
--- End quote ---
I thought that would of been obvious years ago since your 'bread and butter' was not going to live on the race track. Good to see your listening. Or you have new programers who are better than the last :smiley:
--- End quote ---
Meh, we are racers first and foremost, not profiteers, been that way since day one.
Same calibrators, better at listening to you guys is all. :drinking:
--- End quote ---
Proof is in the pudding, you should remap my car to your new file FOC :grin:
--- End quote ---
Who is your closest APR dealer? www.goapr.co.uk
--- End quote ---
I would go to PSItuning as JBS might try to sell me a Chinese turbo :grin:
--- End quote ---
K, send psi or Jbs an email referencing this thread and when they contact me I'll give them a promo code that allows them to flash you FOC.
--- End quote ---
So Keith yesterday you tell me you can do nothing for a ex Apr customer but today you can give free maps out to another :surprised:
--- Quote from: Keith@APR on February 03, 2012, 10:00:02 pm ---
--- Quote from: yin on February 03, 2012, 09:57:11 pm ---
--- Quote from: Keith@APR on February 03, 2012, 07:05:03 pm ---
--- Quote from: richwig83 on February 03, 2012, 06:08:29 pm ---Sounds like desperation!!
--- End quote ---
I would say our customer service philosophy is just a little different than most UK companies.
--- End quote ---
What about APR Customers who had there map taken off because they weren't happy with it, and couldn't get APR to respond to emails about there issues ?
--- End quote ---
I can only focus on the present and future. APR Motorsport, LTD is here to insure that NEVER happens again.
--- End quote ---
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version