All Things Mk5 > Members Rides
James GTI Ko4 2.0tfsi 401bhp - launch control?
GrayMK5GTI:
James is all this on your BWA??
Epic result there, I bet Nick was pleased with that :drool:
R-tech-Nick:
WMI and lots of advance FTW!!!!!!
1.47bar from 3100rpm to 7100rpm... with zero timing pull and lambda locked to .84
I wanted to aim for the Revo/ APR stage-3 100ron 400bhp+ numbers but that would mean running out of range of the stock GTI map sensor.
As for the catch can system I seems is cannot cope with the crank pressures from the blow by from higher power output, unplugged it and vented the crank breater now its all clear.
I cannot wait until Jmaes drives this today, its bang on 100bhp up on the last tuners stage 2+ map which he had last year..
Sammy:
Il be doing the k04 conversion soon, looking forward to the custom stage 3 map at R tech :party:
james:
Yea is a BWA engine, i am just interested to see what their limits are :driver: If it does go bang i will just install a cdl engine with stronger rods :happy2:
We reinstalled the rs4 valve back in the car and it felt like it had lost some power so we put it on the RR, it made around 370bhp 330lb-ft so a few bhp had gone.
Nick played with the map increased the rail pressure and n75 load. The car had changed its tune on the RR
This was the final outcome, nick was not happy leaving it like this due to the rods. I asked him to leave it and we will see how she gets on.
The drive is EPIC! lol
Sunglasses Ron:
Are those figures (360) at the wheels I take it James? Good to see my old mods are being put to good use.. :happy2:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version