All Things Mk5 > Performance Modifications

350bhp&350lbft

<< < (2/4) > >>

Janner_Sy:
@ the OP

Without the intake your always going to limit the power available with the std K04 turbo.  Adding the HPFP and getting a stage 2+ map will release more midrange although your top end will still be choked by the stock airbox.  Id expect 320-330Hp with stage 2+ on the stock intake.  

The other option i think as keith and carl have said is to go for a bigger turbo.  That will give you the extra power, but of course its still going to be running no where near its potential if your still running the stock airbox.  Have you considered an enclosed intake?  They are alot quieter than the open filters. 

If you dont want noise, id steer clear of the evoms, ITG maxogen, neuspeeds, BSH etc

Your the same as me tbh, i dont want to much noise.  im running just a DP and an enclosed filter intake on my car and its marginally louder than stock.

dan930:

--- Quote from: richwig83 on March 22, 2012, 09:27:23 am ---Unless you are prepared to spend 750-1000 on chassis modifications, 300bhp is a sensible amount. Much more and your just going to hit the tree a bit faster and a bit more sideways.

--- End quote ---

It's ok mate,I won't go stupid round corners,I'm just after that push you in yr seat feel when accelerating

Janner_Sy:
you dont need £700-1000 spending on the chassis if your not tracking it tbh.  You could get away with just lowering springs, some better brake pads and maybe a rear anti roll bar.  Whilst it wont be as good as a fully kitted out car, it'll still be better than stock.  That would only be about £350

Keith@APR:

--- Quote from: Janner_Sy on March 22, 2012, 12:42:45 pm ---keith how loud is your RSC sytem in comparison to that VWR TBE on the R?

--- End quote ---

At idle and cruising it is quieter, at WOT its louder.  :evilgrin:

heavyd:
Go to a place called motorscope and get you car on their rolling road. stage 1 cars make 320bhp, stage 2+ Revo make over 380bhp, you can save yourself loads of money  :signLOL:
I thinkg you'll definetly struggle to get those figures you want with a standard airbox though

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version