All Things Mk5 > Mk5 General Area
ET advice
scarpicus:
x2
TurboTrev:
From my experience with 19" MK5 alloys, if you don't want to push the limits of fit, I would say ET45 to ET 50 on the front and ET40 to ET50 on the back.
evvo:
So do you recon I'd get away with ET35 on a set of 19"x9"? or would that be to much poke bearing in mind i could go treched tyres to pull the tread back under?
Top Cat:
--- Quote from: evvo on May 13, 2009, 08:10:04 am ---So do you recon I'd get away with ET35 on a set of 19"x9"? or would that be to much poke bearing in mind i could go treched tyres to pull the tread back under?
--- End quote ---
Still no :grin: That is a couple of mil short of 2 inches further out than a Monza II.
You could weld a little bar to the wing and have it as a hamster treadmill. :laugh:
JPC:
--- Quote from: Top Cat on May 13, 2009, 09:26:34 am ---
You could weld a little bar to the wing and have it as a hamster treadmill. :laugh:
--- End quote ---
:grin: :grin: :grin:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version