All Things Mk5 > Revo Zone
SPS settings for track
fuscobal:
Hello guys,
I'm currently on Revo stage 3 (AXX engine code with 10.5:1 compression ratio). For the past 3 years I've been using B9-T7-F9 with 99-100 octane gasoline and the logs looked great (very good performance either). However, on the track, I've had some engine overheating problems and on the last track day, a water plastic pipe broke and lead to the water pump and head gasket failure. Knowing this, I would like to ask all of you what safer settings do you recommend for track use ? (with 9-7-9 the car makes approx. 370HP/460NM but I can happily accept 330-340HP for more reliability/lower oil&water temps) !
bacillus:
What do your egts look like as F9 seems a bit lean...
fuscobal:
EGTs going to 999+ deg from 4000rpm up but that's what I've seen on all stage 3 cars and I've heard it's normal !
Poppa Dom:
Really hard to say without logging the car - every car is slightly different, even with the same performance hardware. However, I'd say that tune is really pushing it in terms of boost, timing and fuelling. Try dropping the boost back to 7, timing 5 and logging fuelling to get lambda spot on :happy2:
fuscobal:
Here's some logs made 1 year ago with 9-7-9
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Uploaded with ImageShack.us
Navigation
[0] Message Index
[#] Next page
Go to full version