General > Detailing
Correction Detail - Audi A3 2.0T finished in new Auto Finesse DA Sealant!!
markymark:
Awesome work as usual Russ, results speak for themselves! :happy2:
Tfsi_Mike:
--- Quote from: markymark on April 10, 2012, 09:12:21 am ---Awesome work as usual Russ, results speak for themselves! :happy2:
--- End quote ---
Looks AMAZING!
vRS Carl:
Very Nice Russ :congrats:
Quick question, do you really rate Magifoam that much? I've tried a couple of different types of foams and non perform like they claim. Does Magifoam really work that well?
ianv5:
Russ,
As to the Magifoam what ratio do you use ?
At the moment I have a 500ml bottle filled with 1 inch of magifoam, I then fill bottle to the top with warm water. Foam goes on nice and thick but does not dwell as long as you have shown in pictures.
Do you rinse car first before applying foam?
Would be grateful for any suggestions
Thanks Ian
RussZS:
Thanks all :)
Regarding Magifoam - yes, very good cleaner indeed and better than the other foams I've tried whilst remaining 'wax safe'
Dilution Ratio wise I pour about 1 inch into a 1L bottle and top with water (cold as I don't have any hot in my unit).
You must bare in mind that flow rate, pressure etc will all impact how thick the foam is, so my Kranzle will product better foam than a C110 Nilfisk for example.
Cling wise, if you have a sealant on your car it won't cling quite so well due to the slick/hydrophobic nature of the protection - this car had near no protection so cling time can be affected by this also, but Magifoam definitely clings longer than most.
HTH
Russ
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version