All Things Mk5 > Mk5 General Area

wheel arch liner (moving it)

(1/1)

gillm:
i heard somewhere that you can move it up when a car is lowered , how do you do this ?

bacillus:

--- Quote from: gillm on May 17, 2009, 08:03:19 pm ---i heard somewhere that you can move it up when a car is lowered , how do you do this ?

--- End quote ---

No, you can remove the top screw on the arch then tuck the liner above the arch giving you a little extra room when lowering.

Top Cat:
I did mine last week, If you take a peek it screws to the outside of the wing in the centre, just take out the screw and carefully push the liner behind the tab that the screw was held into. then if you feel you need it you can bend the tab further into the inside of the arch, but be careful doing this as i broke the paint seal and a piece flaked off. So i now need to just touch up a bit of the paint on the tab as the primer is exposed on a tiny piece.  :smiley:

DubwayDan:

--- Quote from: Top Cat on May 17, 2009, 08:23:06 pm ---I did mine last week, If you take a peek it screws to the outside of the wing in the centre, just take out the screw and carefully push the liner behind the tab that the screw was held into. then if you feel you need it you can bend the tab further into the inside of the arch, but be careful doing this as i broke the paint seal and a piece flaked off. So i now need to just touch up a bit of the paint on the tab as the primer is exposed on a tiny piece.  :smiley:

--- End quote ---

i had to bend mine right up into the wing :scared:

how low are you at the front Topcat?

Top Cat:
I haven't got mine dropped to low at the minute, but in the next couple of weeks will be as low as i can get it, i have some KW camber adjust top mounts going on as well.  :party:

Navigation

[0] Message Index