All Things Mk5 > Revo Zone

Stage 1 CEL flashing

(1/3) > >>

matt404:
Hello!

I have only had my car a few days and am new to the forum and thought you guys might be able to help.

My car has a Revo Stage 1 map according to the docs that came with the car and a Select Plus box with the following settings 7 / 9 / 6.

I have noted that under full load it occasionally hesitates and the CEL lamp flashes for approx 10 seconds. Presumably this means that the ECU is limitng the power and the map is set a bit too high?

Any ideas what I should look at reducing??

Unfortunatly I dont have a VAGCOM but i would have presumed that this would have been verified by the place that did the remap originally?


P.S. the car has a catback Miltek fitted and a Dbilas flowmaster intake (that sounds a bit like an accordion)


Any ideas?

bacillus:

--- Quote from: matt404 on May 29, 2012, 06:38:30 pm ---My car has a Revo Stage 1 map according to the docs that came with the car and a Select Plus box with the following settings 7 / 9 / 6.
--- End quote ---

Just to be clear and before commenting, are you saying that your present settings are Boost 7 Timing 9 and Fuel 6?

matt404:
Yep. According to paperwork i have the settings are...
Boost: 7
Fuel: 9
Timing: 6

(the car is always run using Shell V Power)

ktlstar:
without vag com who knows what errors its throwing up.

see if anyone is local to you on the vcds members list.

matt404:
Cheers for the advice guys.

A little bit more confused after pluging it into my PC and according to the software it is set to the following settings as the default setting...

Boost 6
Timing 2
Fuel 9

Which doesnt match what is writen on all the documents.  Might try to give the previous owner a call and ask if in the 3 years he had the car ever noticed this issue. Might it be a result of the recent hot weather?

Navigation

[0] Message Index

[#] Next page