All Things Mk5 > Performance Modifications
ITG maxogen - new enclosed filter information.
jedi-knight83:
--- Quote from: bigmig95 on July 07, 2012, 11:09:46 pm ---
--- Quote from: jedi-knight83 on July 07, 2012, 10:05:42 pm ---Oh you got the enclosed bit too?
How did you get yours?
Apparently it's the front part of the mk6 intake
Picked it up today. All looks good.
Sent from my iPhone using Tapatalk
--- End quote ---
Dropped ITG as soon as I saw Pirelli08's thread. Spoke to them nicely and they were very helpful. :happy2:
For anyone else the part numbers to change from open maxogen to cannister type are:
ARAB65/84XL filter
STAB99 air filter housing
STAB99VWRCAISSPA slam panel adapter
Modified STAB99VAGTSIMB mounting bracket assembly.
Let us know what you think when you've fitted it :smiley:
--- End quote ---
Which part is the modified mounting bracket assembly you mention. I've not really had chance to get it all out the box even yet.
Althought the seller did point out a hole on the bottom of the filter enclosure that he presumed was for mounting on the mk6?
Can I ask aswell how much you were charged for the extra canister and bits?
Sent from my iPhone using Tapatalk
bigmig95:
Parts supplied
The modified bracket comes with a rubber strap, pictured in the centre of the photo.
The cannister smaller diameter downstream of the filter sits in the half moon shape bracket and is fastened to the threaded insert just to the front left of the battery box.
Thread insert viewed here
Bracket attached here. Sorry for the poor photo
Hope this helps :happy2:
h4rdy:
I think you did alright there for both options.
I have just emailed ITG to see when its released otherwise I may just buy the parts seperately.
--- Quote from: jedi-knight83 on July 06, 2012, 09:14:58 pm ---
--- Quote from: h4rdy on July 06, 2012, 09:11:15 pm ---I am not sure the size of filter will matter upto a point?
I could be wrong.
The noise levels of the 'standard' Maxogen is far too much for me.
You did well to get both in the deal.
I don't want to know but did you get them for a good price too?
--- End quote ---
£350 for both which is a tad more than a brand new itg on its own. I had set a max budget of £270 for an intake but its practically new and i was curious about the new part so figured it was worth the bit extra.
--- End quote ---
jedi-knight83:
Well its absolutely chucking down with rain and forecast shows heavy rain all day so not alot of hope of getting it fitted today.
Does anyone know a step by step guide to logging the maf / intake temps etc?
IE...
1. plug in vag com and start car
2. log these blocks..
3. do a 0-80 run through gears
etc etc?
Happy to provide all the data i can to compare set ups vs stock etc.
jedi-knight83:
--- Quote from: bigmig95 on July 07, 2012, 11:47:21 pm ---
Parts supplied
The modified bracket comes with a rubber strap, pictured in the centre of the photo.
The cannister smaller diameter downstream of the filter sits in the half moon shape bracket and is fastened to the threaded insert just to the front left of the battery box.
Thread insert viewed here
Bracket attached here. Sorry for the poor photo
Hope this helps :happy2:
--- End quote ---
What's the part in the bottom plastic bag? Not sure I've been given that part
Sent from my iPhone using Tapatalk
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version