All Things Mk5 > Members Rides

Golf Rallye 2.0 TFSI + Haldex 2gen

<< < (51/51)

2fast4you:
I have been putting everything together just so I can remind my self what needed to be done or ordered  :thinking:
This is how it is now  :rolleye:

2fast4you:
Slowly collecting the parts that are needed to finish  :driver:

2fast4you:
Hi guys I just wanted to let anyone interested in this build that it is still an on going build which was put on hold for a while but i have recently started it again and will be updating this thread as soon as i find a little spare time and as soon as i find a host for all the pictures  :happy2: :drinking:

2fast4you:
As i decided to get back at this build there were some parts sold some new so needed to decide in which way the build was going to be going. I sold mi southbend clutch and my CDL engine but now got another one and it was a complete with K04 turbo and I was thinking of keeping it with a stock turbo :innocent: but at the end decided to go big again. Other thing I will change is the gearbox. I'm probably going with the DSG DQ250, and that would be all   :happy2:

First thing I wanted to do is figure out the fueling system so I started with moving the fuel cell to the back of the car because in my country I have to have rear seats to be able to register the car and it's would be easier to fill up



So started with making a bracket that would hold in place the fuel cell



And this is the final product..



I haven't finished the lines and other stuff that are needed for the fueling because I need some parts that I will be ordering but for now I'm continuing my work with what I have ...

So out with the K04 and in with the manifold and the big one ...



Did some pipe work earlier but I did it From An F70 tubing and I thought it was a bit overrated so did one from an f63 tubing ...










Also started on the intake



changed the S3 injectors for the RS4 ones

[img width= height= alt=IMG-778faa71043e88cdac0c9e8f068c93ce-V" border="0]https://i.ibb.co/djS1DR6/IMG-778faa71043e88cdac0c9e8f068c93ce-V.jpg[/img]

One of my biggest concerns was the rear drive axle because if I cut and weld it to size there is no one in my country that could balance it so I tried combining and found a solution. Front pice from an MK5 R32 and the back longer one from an MK1 Audi TT



That's all for now but will keep you posted   :happy2:

Navigation

[0] Message Index

[*] Previous page