General > Detailing

Collinite 476s or Finish Kare FK1000P?

<< < (2/3) > >>

Jaywoo-GTI:
Stealth, Which do prefer for finish and ease of use, Heard FK can be a bit hard to get off if the panel is to cold or applied to thick?

stealthwolf:
Both are pretty much similar.

TBH I've only ever applied them to my car - black diamond pearl. I found the FK1000P gave a kind of glassy look - a bit like the car was wrapped in clingfilm. The downside was that I felt it muted the flake. This wasn't much of a problem in dull overcast winter. The 476s was less shiny but allowed the flake to pop a bit better.

As always, follow the usual advice - apply thin layers and buff frequently, especially in this weather. In winter, I could do half the car and buff off. Leave it too long and both are a PITA to buff off.

MrP:
if you use the collinite, put it on one panel at a time (or even half a panel on roof and bonnet) and then buff off.

leave it too long and it goes like concrete and its a nightmare to get off.

vRS Carl:
FK1000p with FK#2685 Pink Wax over the top gives a nice finish.

Jaywoo-GTI:
Thanks for the help guys, I think i am gonna purchase some FK1000P.  :happy2:

Navigation

[0] Message Index

[#] Next page

[*] Previous page