All Things Mk5 > Members Rides

Bigmig95's Gti - Now stage 3 BYD installation

<< < (15/21) > >>

toms85:

--- Quote ---I wired the remaining pin (pin 2) on the new DAB amp to the original Fakra in the boot that the old amp ran to, I bought a 1m lead off Ebay for this. 

I'd had a fault code thrown up without this cable as I assume the ECU saw this was open circuit .  Last time I checked the fault codes I had none with regards to the stereo.  HTH :happy2:
--- End quote ---

Thanks that's what I've done already but it's not working - radio not seeing a dab aerial, but sees the two others for fm/am. Better get the multimeter out and check the 6m fakra cable for dab.

mrvertigo73:

--- Quote from: bigmig95 on October 11, 2014, 07:54:02 am ---
--- Quote from: toms85 on October 10, 2014, 11:40:55 pm ---
--- Quote from: bigmig95 on September 21, 2014, 08:11:12 pm ---Pretty straightforward to be honest, trickiest bit was feeding the cable through the tailgate grommet.  There's a how to here but no pictures

http://www.golfgtiforum.co.uk/index.php?topic=263921.0

You'll need the amplifier I have and it goes on the left as you look at the rear of the car.  Fitting is easy.  You'll also need a twin Fakra connector and a long lead to get to the front of the car.

I got my double connector here

http://www.ebay.co.uk/itm/121040328853?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

And the long lead to the stereo here

http://www.ebay.co.uk/itm/390874796401?_trksid=p2059210.m2749.l2649&ssPageName=STRK%3AMEBIDX%3AIT

You'll need to remove the straight connector off the long lead (clips off easy) and put the double connector on the lead instead.  Remove the right angled connector on the other end and feed through the boot , grommet, headlining and into the stereo.  Put the right angled connector back on and plug into you DAB socket on your stereo.

Jobs a good 'un.   :happy2:

If you need anymore info let me know.

--- End quote ---

Hi mate, I've just installed the same amp in mine. Do you have two cables going into the amp or just the one for the DAB socket on the RCD?

--- End quote ---

I wired the remaining pin (pin 2) on the new DAB amp to the original Fakra in the boot that the old amp ran to, I bought a 1m lead off Ebay for this. 

I'd had a fault code thrown up without this cable as I assume the ECU saw this was open circuit .  Last time I checked the fault codes I had none with regards to the stereo.  HTH :happy2:


--- Quote from: mrvertigo73 on October 11, 2014, 12:27:28 am ---This all looks great bigmig and defo the way I wanna go with my K03 '05 AXX GTI! Quick question - did you have any trouble swapping midline for highline? I bought highline clock off EBay, but everyone with VCDS is telling me it's a nightmare to swap? Any clues? I'm looking to swap in a MFSW too (mines DSG)

--- End quote ---

No trouble at all as Kalu did it all for me.   :grin:  He needed to get around the Immo issue and I left him with the new dash for an hour then showed back up at his house and he swapped in 20 mins, drop him a pm.  If you're too far away I'm sure I remember the option of posting the dash to him and him then giving you a quick run through on the install  via e-mail or pm's.  :happy2:

--- End quote ---

Awesome stuff. I'm in Bristol. Will PM Kalu. Cheers dude

bigmig95:

--- Quote from: toms85 on October 11, 2014, 08:59:57 am ---

Thanks that's what I've done already but it's not working - radio not seeing a dab aerial, but sees the two others for fm/am. Better get the multimeter out and check the 6m fakra cable for dab.

--- End quote ---

@toms85 Apologies if you're already doing this but you are going into the DAB socket on the back of your head unit aren't you ? 

Connector Number 1 below on the Rcd510 .(if that's the head unit you're using ?)

toms85:
Thanks - sorted it in the end was something simple.. the right angled fakra connector which plugs into the dab socket on the Rcd was a bit loose and not making contact with the centre pin. Adjusted the plug with a needle so it fitted more snugly and bingo dab started working!

bigmig95:
Well done fella.  Enjoy


Sent from my iPhone using Tapatalk

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version