Make a donation

Author Topic: Boot Interior Lining Graze/Rear Bumper Graze  (Read 1774 times)

Offline rdfcpete

  • Just look at my post count
  • ******
  • Thank You
  • -Given: 98
  • -Receive: 52
  • Posts: 2567
    • Email
Boot Interior Lining Graze/Rear Bumper Graze
« on: June 13, 2009, 06:58:26 pm »
Ever so slightly grazed the plastic interior lining to my boot from where I'd put my mates mountain bike, that was neatly wrapped in a traveling cover.

It's nothing major but I wondered if there's a gell or a lubricant that will smooth it off and give it a new'ish look again?

Also, I've got a similar graze on the STD GTi rear valance/bumper, different cause but similar affect.
Is there an alternate product I can use or would it be the same?

Pics below so you know exactly where/what I mean  :smiley:

Boot plastic lining:

Another angle:

Black Rear Bumper/Valance (Ultimately will probably colour code in a few months, leaving the black diffuser look but wouldn't mind smoothing it out regardless pre-primer/painting)


Thanks guys,
Pete.
Pete


RNS-E LED 2012 | Aux-In | AP Coilovers |  Hawk HPS Pads | Revo Stage 1+
Previous: OEM+ 2006 MK5 Golf GTI 2.0T FSI Steel Grey 3 Door

WILLZIE

  • Guest
Re: Boot Interior Lining Graze/Rear Bumper Graze
« Reply #1 on: June 29, 2009, 12:09:30 pm »
I had to replace this as once its scored its scored.
£17.78+vat
1k6863459r9b9