All Things Mk5 > How to Guides / Troubleshooting

MK5 HVAC/Climate Control expert needed!!

<< < (3/6) > >>

Squeeguk:
I would have thought if it was the flap motor, it would bring up errors on VCDS. I know when I put my Mk6 panel in, I had issues and ended up having to replace the whole flap assembly. It was giving me errors on the flaps in VCDS.

If that is your problem, hopefully you don't need to replace the whole flap assembly as that is a dash out job and a lot of expletives will be uttered. :signLOL:

rich83:
Well no errors in vcds mate..  :stupid:

Squeeguk:
Yeah, does sound like a possible flap issue though. If there are no errors, then I am not sure what it could be. You've done the compressor start stop process right? Another thing to try is try it without the flap motors connected and see if it does the same thing. You will need to take the glovebox out though.

rich83:
Thats an idea... any pics of where/what i need to do please?

Squeeguk:
Popping out now for a little while. Will start googling when I get back. You need info on the glovebox removal or?

Navigation

[0] Message Index

[#] Next page

[*] Previous page