All Things Mk5 > Mk5 General Area
Foot rest...
Hurdy:
Happy Birthday Tom :happy2: :drinking:
stealthwolf:
--- Quote from: no golf clubs at all on June 27, 2009, 09:25:14 am ---Gulf send screws with the footrest
--- End quote ---
Only if you go for the foot rest with screw holes in it. I went for the screw-less one.
candy turbo:
i used small rivits for the foot rest , looks good
Ifti:
I used the proper bolts that are sent with the foot rest for mine - looks much better this way IMO.
There is a large screw just behind the brake pedal, and a second screw on the right side of the footrest. You can see both in the pic below...
Remove both of these, and the entire plastic casing slides up and out very easily.
You can then fit the footrest with ease using the bolts.
Put some red insulation tape or somet behind the 'GTI' cutout to make it look even better :wink:
For the seat inlays, use the same red tape trick to make the 'GTI' red, and use double sided sticky tape to stick it down into place. You dont really want to use super glue in case you ever want to remove the inlays - to clean them if they get dirty for example.
rdfcpete:
^ Got a non-ebay link to where I could purchase that or similar at all please ITFI?
They're about £25 on there and I'm not totally sure where you can specify you want the GTi one, as there's a choice.
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version