General > Detailing

Testing out the crimbo cleaning products

(1/5) > >>

Markydee:
Hi All

Got a few more products to add to the collection recently and as the car is filthy and the weekend weather looks good (ish) I'm going to attempt a details.
I'm going to attemt claying for the first time - any pointers other than don't drop the clay etc?
The car already has some protection as its still beading well (AG Extra Gloss Protection sealant) - Do I need to remove this before the clay stage? If so I've heard fairy liquid can be used to strip back any previous layers? Has anyone tried/ had any success with this.
I now have the majority of the AG product range so was wondering whether all should be used and if this is the correct order:
1. Wash with Fairy Liquid to remove previous wax etc.
2. Wash (2 buckets obviously) with AG Body Work Conditioner
3. Clay
4. Auto Glym SRP
5. Now this is where I start to get confused - I have AG Ultra Deep Shine (I believe it's a glaze of a sort)? Do I do this now?
6. Extra Gloss Protection (sealant) - Unsure whether this is needed as I will then wax??? Also heard that UDS & EGP dont work together particularly well???
7. AG HD Wax

Any tips/ advice (as always would be greatly appreciated.

Cheers :happy2:

andrewparker:
Claying will remove the previous layers of wax...

maxload:

--- Quote from: Markydee on January 04, 2013, 03:53:16 pm ---Hi All

Got a few more products to add to the collection recently and as the car is filthy and the weekend weather looks good (ish) I'm going to attempt a details.
I'm going to attemt claying for the first time - any pointers other than don't drop the clay etc?
The car already has some protection as its still beading well (AG Extra Gloss Protection sealant) - Do I need to remove this before the clay stage? If so I've heard fairy liquid can be used to strip back any previous layers? Has anyone tried/ had any success with this.
I now have the majority of the AG product range so was wondering whether all should be used and if this is the correct order:
1. Wash with Fairy Liquid to remove previous wax etc.
2. Wash (2 buckets obviously) with AG Body Work Conditioner
3. Clay
4. Auto Glym SRP
5. Now this is where I start to get confused - I have AG Ultra Deep Shine (I believe it's a glaze of a sort)? Do I do this now?
6. Extra Gloss Protection (sealant) - Unsure whether this is needed as I will then wax??? Also heard that UDS & EGP dont work together particularly well???
7. AG HD Wax

Any tips/ advice (as always would be greatly appreciated.

Cheers :happy2:

--- End quote ---

1. Rinse
2. Two bucket wash thougherly/if possible use fallout remover such as ironx
3.Rinse/wash
4.Clay
5.UDP as I don't think wax properly bonds on top of a sealent
6.HD Wax

Sound's good to me , but I'm sure there will be other opinions  :happy2:

Frodo-anni:
Step away from the fairy liquid  :fighting: :fighting:

Markydee:
Really? I'm sure I've read than somewhere on one of the detailing sites?... So will the clay remove previous layers? Only reason I ask is that the instructions on the clay kit state after claying to use AG HD Cleanser to remove residues of previous wax?
Any suggestions on what to use didn't really want to fork out for a special cleanser  :happy2:

Navigation

[0] Message Index

[#] Next page