All Things Mk5 > Mk5 General Area

wheels & tyres

<< < (2/3) > >>

VeeDubDan:

--- Quote from: Top Cat on July 08, 2009, 09:25:20 am ---Not sure but i think you would need a spacer on the front and the wheels would have a bit of poke.  :happy2:

--- End quote ---

Are you sure? Those sizes don't look too far off standard.

Top Cat:

--- Quote from: VeeDubDan on July 08, 2009, 10:05:41 am ---
--- Quote from: Top Cat on July 08, 2009, 09:25:20 am ---Not sure but i think you would need a spacer on the front and the wheels would have a bit of poke.  :happy2:

--- End quote ---

Are you sure? Those sizes don't look too far off standard.

--- End quote ---

Yes you are right, i dont know why but i read it as 9.5j ET 48  :signIWS:

Peskarik:

--- Quote from: TurboTrev on July 08, 2009, 10:05:27 am ---as above, although 235/35x19 will be fine as well (better than 215s although these would fit).  My wheels are 8x19, ET50 with 235s and although they sit slightly within the arch, for the style of wheel I have that's fine by me.  Spacers would only be needed if you want to push them right to the edge of the arch and probably only for the back (8mm).

--- End quote ---

but 8mm spacers are non-centered.
Aren't we against noncentered spacers? Especially on the front?

Mark_GTIV:
You can get 8mm spacers that are centered (spigoted).

e.g. H&R Trak+

candy turbo:
cheers every one , any one actually got that set up ? any rubbing etc . would never fit spacers again !!!!! :happy2:

Navigation

[0] Message Index

[#] Next page

[*] Previous page