All Things Mk5 > Mk5 General Area

Questions to those who have VF/VWR engîne mounts installed

<< < (6/10) > >>

tony_danza:
See the green bit on the joint of the dogbone?

In there. It's a soft-ish voided rubber bush.

john_o:
as tony says the middle bolt.....

RedRobin:
^^^^
Thanks, both! :drinking: & :drinking:

I thought it probably was but it's good to confirm. On the list for my next VWR session - Powerflex PFF 85-505 according to the lefthand box in the pic.

john_o:
worth an update me thinks

powerflex dog bone bush ordered from Awesome :
Lower Engine Mount Front PFF85-505
usual great customer service , thanks Sarah   :drinking:

VWR lower engine mount  ordered (Road) :
LWR SUBFRAME   PART No VWR1KO   203
after recent forum members comments, I was a little concerned but gave em a call as its the VWR stuff I wanted
I spoke to both Claire (sales) and Mark (tech) , they even called me back  :happy2:
Great advice given and part duly ordered. Its seems it should take roughly 75% of the slack out , so thats my first point of call (I suspect that itll be a full set eventually but I need to know the incremental differences for cabin NVH levels)

Its worth stating that based on my current experience VWR look to be trying very hard to improve things and I felt that was worth mentioning here. heres hoping it continues.

both parts to be fitted by Awesome at some point, and then onto the Pod to get   low 15's high 13's
Red leader has already done a review on this part  :sad: , so Im lost  :grin:

SteveP:
Great info John_O  :happy2:

Navigation

[0] Message Index

[#] Next page

[*] Previous page