All Things Mk5 > Performance Modifications

Porsche cayenne brakes ????

<< < (2/3) > >>

camfollower:
How about the touareg 4 pots?  Any cheaper than 986's?

Tuffty:
I have a set on my ED30

They bolt up but you'll need spacers manufactured to make the bolt holes smaller and high tensile bolts to boly them to your hubs. I've used 350mm Mercedes ML discs (£150 from Mercedes dealers) but these will need a ring put inside the disc to fit the hubs also. Currently I'm running standard Pescara's and have to use a 12mm spacer to clear the brakes

Hope this helps

DaveB@Vagbremtechnic:
And shoulder bolts proper ones in EN16 are £100 a set.....DONT buy the ebay ones, call me old fashioned but the brakes holding your brakes on need to be up to the job and tested.

Last time we tested some EN16 bolts we got 70 tensile tonnes in shear, the bolts VW supply to attach the subframes to the cars are 12.9 Tonnes for comparison...

Ours are also fine threaded .......you could hang a Mk5 from a museum roof with one of these puppies

ChrisP:
Do you make/sell the calipers brackets for the GT2 version of the Porsche 6 pot at all Dave?

DaveB@Vagbremtechnic:
Yep got those....

Navigation

[0] Message Index

[#] Next page

[*] Previous page