All Things Mk5 > Mk5 General Area

How much boost does an ED30 Run?

(1/2) > >>

cossy:
Just had a couple of reduced boost maps from superchips.

Each map reduced by 0.05 bar.

How much BHP would I roughly be getting with reducing the boost by this much?

SC unable to tell me. :P

Hurdy:
I wouldn't have thought that reducing the boost by 0.05bar / 0.73psi would make too much difference.

cossy:

--- Quote from: Hurdy on July 29, 2009, 11:14:30 am ---I wouldn't have thought that reducing the boost by 0.05bar / 0.73psi would make too much difference.

--- End quote ---

thats what i thought, but didnt think they meant 0.5bar.

What should it be running standard?

cheers

Hurdy:
0.5bar would be 7.3psi which would make it almost stock and not worth the money!!

I'm running peak 23psi on stage 2+. Stage 1 remap would be around peak 21psi and stock is (from memory) around 13-14psi, so knocking off 0.5bar is basically a stock map, which would be really strange!!

john_o:
mines stage 1 APR and peaks 21 psi , dropping to 17 across range .....
sure they didnt mean 0.5 psi increments ???

is this to get round an issue?
if so it may be very small drops to get around triggering the failsafes...

Navigation

[0] Message Index

[#] Next page