General > Shows, Events and Meets

Potters Bar, Herts meet (Furzefield Centre) - Date: 01 June 20.00

<< < (13/16) > >>

chowgar:
Wait till kalp is driving home after watching Fast and furious 6...

Like it's stolen I guess....

Good little meet nice to see faces. Catch you all next time.

jonnym:
Once again....sorry guys. Ill do a BBQ next time if the numbers add up!

ReeceH13:
Was a good night lads good to put some faces to names, and nice to see those who I've met before. Bring on the next meet  :party:

rich83:
2 Faults Found:
012691 - Intake Manifold Runner Control
               P3193 - 002 - Open Stop outside of Valid Range
             Freeze Frame:
                    Fault Status: 01100010
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 125017 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 20:02:23

             Freeze Frame:
                    RPM: 763 /min
                    Load: 19.2 %
                    Speed: 0.0 km/h
                    Temperature: 90.0°C
                    Temperature: 52.0°C
                    Absolute Pres.: 1000.0 mbar
                    Voltage: 13.716 V

001602 - Sensor Reference Voltage A: Circuit
               P0642 - 002 - Low
             Freeze Frame:
                    Fault Status: 01100010
                    Fault Priority: 0
                    Fault Frequency: 1
                    Mileage: 125017 km
                    Time Indication: 0
                    Date: 2000.00.00
                    Time: 20:02:23

             Freeze Frame:
                    RPM: 763 /min
                    Load: 19.2 %
                    Speed: 0.0 km/h
                    Temperature: 90.0°C
                    Temperature: 52.0°C
                    Absolute Pres.: 1000.0 mbar
                    Voltage: 13.843 V

Readiness: 0110 0101

ReeceH13:
Thank you rich you're a gent  :happy2: Now I have to try to disypher this jubberish, just noticed 2 indicator LED's have blown, maybe this has something to do with it?

Navigation

[0] Message Index

[#] Next page

[*] Previous page

Go to full version