All Things Mk5 > Mk5 General Area

Anyone logged their MAF Output?

(1/4) > >>

bacillus:
According to Revo for the GTi you should see a value around 190-205 g/s at full load (VCDS block 002).

What value are you seeing and could you also state what intake you are using along with your mods.

Ta

john_o:
good question  :happy2:
I'll pester TC and we'll get one K03 and one K04 dataset

SteveP:
Here's some I have captured from mine Edition 30 DSG: -

Config 1: -

Revo Stage 2 + (B9-T6-F9)
Milltek TBE
KMD HPFP
Stock Intake with Pipercross Panel

Peak 248 g/s peak

Config 2: -

Revo Stage 2 + (B9-T6-F9)
Milltek TBE
KMD HPFP
VWR Intake

Peak 237 g/s peak

These where taken on one day apart after the car had been running for at least 30mins. The ambient temp was 1c lower on the test of config 2.

Golfgirl:
I have but can't remember the figures :grin:  I'll ask the boss when he gets home :happy2:

bacillus:

--- Quote from: SteveP on July 31, 2009, 02:22:35 pm ---Here's some I have captured from mine Edition 30 DSG: -

Config 1: -

Revo Stage 2 + (B9-T6-F9)
Milltek TBE
KMD HPFP
Stock Intake with Pipercross Panel

Peak 248 g/s peak

Config 2: -

Revo Stage 2 + (B9-T6-F9)
Milltek TBE
KMD HPFP
VWR Intake

Peak 237 g/s peak

These where taken on one day apart after the car had been running for at least 30mins. The ambient temp was 1c lower on the test of config 2.

--- End quote ---

Steve, have you had your car with its present mods on a RR?
Just curious as if you use the suggested formula of peak airflow being roughly 0.80 times your horsepower (if you are close to sea level) then your car only has around 300bhp which for a stage 2+ car is unbelievable...   :confused:

Navigation

[0] Message Index

[#] Next page