All Things Mk5 > Members Rides
Monte's RS Edition30 DSG (seat repair pg17)
gazbutS3:
--- Quote from: monte on October 07, 2013, 08:57:21 am ---For the CKs Gaz?
If so what size? :popcornsoda:
--- End quote ---
Yes the CK's mate, Well we get away with it on mine because I run daveb disks and brackets which move everything 12mm inboard, I get about 6mm clearance, so by my reckoning a 10mm spacer would give you 4mm. We have tried the CK's on another lads S3 with the ttrs discs and they wouldn't fit. Have a look on vagoc mate there is quite a lengthy thread on there about what fits and what doesn't
monte:
--- Quote from: gazbutS3 on October 07, 2013, 05:31:17 pm ---
--- Quote from: monte on October 07, 2013, 08:57:21 am ---For the CKs Gaz?
If so what size? :popcornsoda:
--- End quote ---
Yes the CK's mate, Well we get away with it on mine because I run daveb disks and brackets which move everything 12mm inboard, I get about 6mm clearance, so by my reckoning a 10mm spacer would give you 4mm. We have tried the CK's on another lads S3 with the ttrs discs and they wouldn't fit. Have a look on vagoc mate there is quite a lengthy thread on there about what fits and what doesn't
--- End quote ---
Oh Poop :sad1:
gazbutS3:
--- Quote from: monte on October 07, 2013, 06:26:51 pm ---
--- Quote from: gazbutS3 on October 07, 2013, 05:31:17 pm ---
--- Quote from: monte on October 07, 2013, 08:57:21 am ---For the CKs Gaz?
If so what size? :popcornsoda:
--- End quote ---
Yes the CK's mate, Well we get away with it on mine because I run daveb disks and brackets which move everything 12mm inboard, I get about 6mm clearance, so by my reckoning a 10mm spacer would give you 4mm. We have tried the CK's on another lads S3 with the ttrs discs and they wouldn't fit. Have a look on vagoc mate there is quite a lengthy thread on there about what fits and what doesn't
--- End quote ---
Oh Poop :sad1:
--- End quote ---
have a look at that thread on vagoc mate, might even be worth a pm to DaveB, anyway I can help just shout up :happy2:
Edition_slim:
Your new brakes get me a little too exited :laugh:
I didn't want to do too much to my Ed30 but yours gives me bad ideas......
monte:
Well today I sprayed my Track wheels. (Well I made a start) :innocent:
I decided to give Plastidip a try after I'd used it on various badges. The process is very very easy. A good clean and a wipe down with IPA is all the prep needed before spraying. No sanding needed. :notworthy:
I'll be finishing the rest tomorrow and then on Wednesday I hope to get them on the car for some photos :smiley:
I'm really impressed with the results so far. :drool:
Before:
After a light coat:
One wheel finished:
Navigation
[0] Message Index
[#] Next page
[*] Previous page
Go to full version